Zorabots presents a new version of ZoraControl for Nao V6 robot.
In order to install the software on your robot, please provide information of your robot via support ticket.
The robot information can be easily retrieved with the Multi-tool.
Please note that both the robot and the computer on which you install ZoraControl have to be connected to the internet.
It is also advisable that the robot is connected with a network cable with your network or with a router with internet access.
At the end of the installation the robot will shut itself off.
Restart the robot and wait until the robot reports that it is ready for use.
If you are not allowed to install the software, please make a ticket via support ticket and we will adjust this as soon as possible.
Click the download link below for ZoraControl latest version:
- ZoraControl version 1.3.0 (zip file must not be unpacked)
- Security file (see in attachment / must be in the same location as the installation program)
- Installation program of ZoraControl
- Manual of installation program
- Manual ZoraControl (manual of V5 robot as V6 manual is not available yet)
Note: To execute properly the installation program, the latest version of the Java Runtime Environment must be installed on the computer. To download the latest version, please check the following link.
MAKE SURE THE 32-BIT VERSION IS INSTALLED, even if the computer is running a 64-bit version Windows
If your robot has not yet worked with ZoraControl, first check if you have the correct NAOqi version. This version must be the Naoqi version 18.104.22.168.
For good support and support, it is always advisable to install the latest software update on your robot.
If you have questions or comments please make a ticket via support ticket.
We will get back to you as soon as possible.
WHAT HAS CHANGED?
- Implementation of a license system